Some of the pre-filled syringes of Merck's vaccine may have levels of the Hepatitis An antigen below product specification limits and therefore may not provide an adequate protection against the disease, according to the FDA.
22.
The USB PD specification provides the ability for 5 V devices to draw more than ( the USB battery-charging specification limit of ) 7.5 W of power from USB " PD-aware " ports when using PD-aware USB cables.
23.
An industry standard chemical test for the detection of free water in jet fuel uses a water-sensitive filter pad that turns green if the fuel exceeds the specification limit of 30 ppm ( parts per million ) free water.
24.
In addition to limiting the total average power used by the device, the USB specification limits the inrush current ( i . e ., that used to charge decoupling and filter capacitors ) when the device is first connected.
25.
As process standard deviation goes up, or the mean of the process moves away from the center of the tolerance, fewer standard deviations will fit between the mean and the nearest specification limit, decreasing the sigma number and increasing the likelihood of items outside specification.
26.
Control charts limit specification limits or targets because of the tendency of those involved with the process ( e . g ., machine operators ) to focus on performing to specification when in fact the least-cost course of action is to keep process variation as low as possible.
27.
The California Air Resources Board ( CARB ) and the EU will have limits at 10 % and 14 % respectively, while the U . S . federal specifications limit aromatics to 35 % Soot production plays a major role in smog and environmental concerns, causing for these restrictions to be put in place.
28.
If the upper and lower specification limits of the process are USL and LSL, the target process mean is T, the estimated mean of the process is \ hat { \ mu } and the estimated variability of the process ( expressed as a standard deviation ) is \ hat { \ sigma }, then commonly accepted process capability indices include:
29.
In other words, they assume that after the initial study determining the short-term sigma level, the long-term DPMO figure given for 1 sigma assumes that the long-term process mean will be 0.5 sigma beyond the specification limit ( C pk = 0.17 ), rather than 1 sigma within it, as it was in the short-term study ( C pk = 0.33 ).
30.
Practitioners may also encounter \ hat { P } _ { p } = \ frac { USL-LSL } { 6 \ times \ hat { \ sigma } }, a metric that does not account for process performance not exactly centered between the specification limits, and therefore is interpreted as what the process would be capable of achieving if it could be centered and stabilized.
How to say specification limit in Hindi and what is the meaning of specification limit in Hindi? specification limit Hindi meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.
