This situation reduces the useful landed mass capability of entry, descent, and landing because an increase in thermal load leads to a heavier support structure and thermal protection system ( TPS ) of the aeroshell.
22.
4 ) In cases where incandescent lighting was replaced with fluorescent, the HVAC system may have been designed for the thermal load of the incandescents, and may need to be retuned for the cooler fluorescents.
23.
Peltier ( thermoelectric ) cooler performance is a function of ambient temperature, hot and cold side heat exchanger ( heat sink ) performance, thermal load, Peltier module ( thermopile ) geometry, and Peltier electrical parameters.
24.
Additionally, injectors are also usually key in reducing thermal loads on the nozzle; by increasing the proportion of fuel around the edge of the chamber, this gives much lower temperatures on the walls of the nozzle.
25.
Conversely, frequent rearrangement of fuel within the core can balance the thermal load and allow higher fuel burnup, therefore reducing both the fuel requirements, and subsequently the amount of high-level nuclear waste for disposal.
26.
The building's large notches will also serve as shaded terraces for other areas of the tower and the exterior of the building will use low-conductivity glass to save on cooling costs by reducing thermal loads.
27.
The combination of beam conditioning devices controls the thermal load ( heating caused by the beam ) at the end station; the spectrum of radiation incident at the end station; and the focus or collimation of the beam.
28.
Aluminum and steel expand and contract at significantly different rates under thermal load, so a connection can become loose, particularly for older terminations initially installed with inadequate torque of the screws combined with creep of the aluminum over time.
29.
There is a tradeoff inherent in these two issues : by increasing the flow rate ( and the ability to remove greater thermal loads ), the vertical temperature gradient can be reduced, but this could increase the risk of drafts.
30.
This category is a compromise between the continuous and flash, having the disadvantage of the high power usage and relatively low intensities of the continuous simulators, but advantage of stable output intensity and spectrum and low thermal loads of flashed simulators.
How to say thermal load in Hindi and what is the meaning of thermal load in Hindi? thermal load Hindi meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.
