41. When the pipe wall resists this swaging action, it generates high unit compressive loads at the contact points. 42. It is wound on soft copper sideposts, which are swaged over the grid windings to hold them in place. 43. Swaging is normally the method of choice for precious metals since there is no loss of material in the process.44. A clamp attaches a mandrel and die to the tooth and the eccentric die is rotated, swaging the tip. 45. A much earlier version of the same operation used a hardened, shaped swage die and a hand held hammer. 46. As the force required for swaging increases during the process, the installation is finalised when the pintail breaks off. 47. A reamer or a swage is used to remove both these styles of crimp, whether ring crimps or stab crimps. 48. Yamaha had used a relatively unusual method, called " swaging ", of affixing the cam sprockets to the camshafts. 49. Swage blocks are anvil-like dies with various shapes forged into them, which are also used for forming metal.50. A swaging machine works by using two or four split dies which separate and close up to 2000 times a minute.
