cold working sentence in Hindi
Sentences
Mobile
- Baer has assisted with cold working techniques including engraving and sandblasting of both the glass vessels and their base plates.
- It can attain moderate to high strength by cold working, and has relatively high welded strength compared to other aluminum alloy families.
- While more tensile cold working increases the tensile yield strength, the local initial compressive yield strength after tensile cold working is actually reduced.
- While more tensile cold working increases the tensile yield strength, the local initial compressive yield strength after tensile cold working is actually reduced.
- In both pure metals and many alloys that can not be heat treated, annealing is used to remove the hardness caused by cold working.
- After the casting and heat treatment processes, malleable iron can be shaped through cold working, such as stamping for straightening, bending or coining operations.
- Cold forming has the effect of increasing the yield strength of steel, the increase being the consequence of cold working well into the strain-hardening range.
- Rotary swaging process is usually a cold working process, used to reduce the diameter, produce a taper, or add a point to a round workpiece.
- Cold working generally results in a higher yield strength as a result of the increased number of dislocations and the recovery and recrystallization reduce the dislocation density.
- From these observations he drew conclusions regarding the structure of pearlite and ferrite, and he was also able to watch the recrystallization of steel during cold working.
- Intermediate annealings may be required to reach the required ductility to continue cold working a workpiece, otherwise it may fracture if the ultimate tensile strength is exceeded.
- This steel contains greater concentrations of residual elements that cannot be removed through the application of oxygen and reinforcing bar and other products that require little cold working.
- Critics say Green and president Roger Headrick have created a cold working environment that pays too much attention to the bottom line and too little to employee needs.
- Drawing is usually performed at room temperature, thus classified as a cold working process, but it may be performed at elevated temperatures for large wires to reduce forces.
- When steel is formed by press-braking or cold rolled forming, there is a change in the mechanical properties of the material by virtue of the cold working of the metal.
- Laser peening is unlike the other manufacturing processes in that it neither heats or adds material; it is a mechanical process of cold working the metallic component to impart compressive residual stresses.
- Hot working of nitinol is relatively easy, but cold working is difficult because the enormous elasticity of the alloy increases die or roll contact, leading to tremendous frictional resistance and tool wear.
- The tool used to flare tubing consists of a die that grips the tube and a mandrel that is forced into the end of the tube to form the flare by cold working.
- This cold working increases the strength and hardness of the alloy, and the defects caused by plastic deformation tend to speed up precipitation, increasing the hardness beyond what is normal for the alloy.
- Coining is a cold working process ( similar to forging which takes place at elevated temperature ) that uses a great deal of force to plastically deform a workpiece, so it conforms to a stamping.
cold working sentences in Hindi. What are the example sentences for cold working? cold working English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.