countershaft sentence in Hindi
Sentences
Mobile
- This allows the transmission designer to make the transmission narrower, since each countershaft need only be half as long as a traditional countershaft with four gears and two shifters.
- This allows the transmission designer to make the transmission narrower, since each countershaft need only be half as long as a traditional countershaft with four gears and two shifters.
- It had a three-speed Sturmey-Archer countershaft gearbox with kick-start, rear chain ( as opposed to belt ), Druid forks, and Amac or Senspray carburettor.
- A "'jackshaft "', also called a " countershaft ", is a common mechanical design component used to transfer or synchronize rotational force in a machine.
- Power was transmitted to the rear wheels through a four-speed countershaft gearbox and a steel propeller shaft . A top speed of 65 km / h ( 40 mph ) was claimed.
- Douglas version was on sale, similar to the Fairy with the engine in-line mounted high in the frame, but without the chain driven countershaft beneath, and with belt final drive.
- Cone-head lathes usually had a countershaft ( layshaft ) on the back side of the cone which could be engaged to provide a lower set of speeds than was obtainable by direct belt drive.
- Although Sturmey-Archer were offering a 3-speed countershaft gearbox with integral kick-start from this date, it is not clear that the one used by Hazlewood was a Sturmey-Archer product.
- Under one possible design, the transmission's input shaft has just one pinion gear, which drives the countershaft . Along the countershaft are mounted gears of various sizes, which rotate when the input shaft rotates.
- Under one possible design, the transmission's input shaft has just one pinion gear, which drives the countershaft . Along the countershaft are mounted gears of various sizes, which rotate when the input shaft rotates.
- From this two forward gears were provided by belts to either of the rear wheels with ratios selected by clutches on different diameter pulleys on either end of the countershaft . Braking was by blocks bearing on the drive pulleys.
- From 1913 the Duo was available with an extra chain driven countershaft with two gears and dog clutches before the drive went to the variable pulley arrangement, so that gear ratios extended from 4 : 1 to 16 : 1.
- The output shaft's speed relative to the countershaft is determined by the ratio of the two gears : the one permanently attached to the countershaft, and that gear's mate which is now locked to the output shaft.
- The output shaft's speed relative to the countershaft is determined by the ratio of the two gears : the one permanently attached to the countershaft, and that gear's mate which is now locked to the output shaft.
- In following with what their competitors had already been doing, Kawasaki's new engine featured a stacked gear arrangement in which the crankshaft, primary drive and countershaft are placed in a triangular format for a shorter, more compact powerplant.
- For instance a five-speed transmission might have the first-to-second selectors on the countershaft, but the third-to-fourth selector and the fifth selector on the mainshaft, which is the configuration in the 1998 Honda Civic.
- In newer transmissions, there may be two countershafts, so each main shaft gear can be driven from one or the other countershaft; this allows construction with short and robust countershafts, while still allowing many gear combinations inside a single gear case.
- The three models were the HS-which was fitted with a two-speed countershaft gear operated by dog clutches, with chain drive to the gearbox, and John Bull rubber belt drive to the rear wheel over an adjustable pulley allowing the top gear range to be varied.
- In 1914 the main supplier of rear-hub gearboxes, Sturmey-Archer, introduced a 3-speed countershaft gearbox with integral kick-starter . some later models used a gearbox above the engine, though where the engine was short enough the preferred option was the conventional layout.
- Each of the forward gears on the countershaft is permanently meshed with a corresponding gear on the output shaft . However, these driven gears are not rigidly attached to the output shaft : although the shaft runs through them, they spin independently of it, which is made possible by Reverse.
countershaft sentences in Hindi. What are the example sentences for countershaft? countershaft English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.