liquidus sentence in Hindi
Sentences
Mobile
- The composition of a magma is the primary control on which mineral is crystallized as the melt cools down past the liquidus.
- The temperature at which melting begins is called the solidus, and the temperature when melting is just complete is called the liquidus.
- The filler metal is brought slightly above its melting ( liquidus ) temperature while protected by a suitable atmosphere, usually a flux.
- Too little time above liquidus may trap solvents and flux and create the potential for cold or dull joints as well as solder voids.
- This will tend to increase the silica content of the melt, which will eventually prompt a mineral to reach the liquidus for that magma composition.
- The liquidus temperature has been modeled by non-linear regression using neural networks and disconnected peak functions . and at eutectic points sudden changes occur.
- The thermal profile is often measured along a variety of dimensions such as slope, soak, time above liquidus ( TAL ), and peak.
- For this reason the metallic magma reached the liquidus curve ( a point where solids coexist with a liquid ) of the iron + liquid field.
- Successful profiles range in temperature up to 30 �C higher than liquidus, which is approximately 183 �C for eutectic and approximately 217 �C for lead-free.
- The temperature at which melting begins for a mixture is known as the " solidus " while the temperature where melting is complete is called the " liquidus ".
- Above the liquidus temperature the material is homogeneous glasses can be obtained through sufficiently fast cooling, i . e ., through kinetic inhibition of the crystallization process.
- Please get rid of the horizontal / vertical line stuff under the liquidus line . ( They are " correct ", but offputting for a non P chemist.
- The liquidus temperature is important in the glass industry because crystallization can cause severe problems during the glass melting and forming processes, and it also may lead to product failure.
- Since non-eutectic solder alloys have a small plastic range, the joint must not be moved until the solder has cooled down through both the liquidus and solidus temperatures.
- The most common defect when hand-soldering results from the parts being joined not exceeding the solder's liquidus temperature, resulting in a " cold solder " joint.
- There may be a gap between the solidus and liquidus; within the gap, the substance consists of a mixture of crystals and liquid ( like a " slurry " ).
- Tin forms intermetallics such as Cu 5 Sn 6 and Ag 3 Cu that dissolve into the Tin liquidus or solidus ( @ 50C ), stripping surface coating or leaving voids.
- Adding silica also reduces the melting point ( or, more properly, the liquidus temperature ) of the slag, meaning that the smelting process can be operated at a lower temperature.
- "Semi-solid die casting " uses metal that is heated between its liquidus and either solidus or eutectic temperature, so that it is in its " mushy region ".
- The crystal phase that crystallizes first on cooling a substance to its liquidus temperature is termed "'primary crystalline phase "'or "'primary phase " '.
liquidus sentences in Hindi. What are the example sentences for liquidus? liquidus English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.