twist drill sentence in Hindi
Sentences
Mobile
- Bits look similar to a twist drill or end mill; some cut on the upward twist, and some cut downwards.
- The Dormer brand trademark originally used as a brand name for the company's twist drills was registered in 1924.
- In 1884, the Syracuse Twist Drill Company, established in 1877, were manufacturers of twist drills and mechanics'tools at 166 Grape Street.
- In 1884, the Syracuse Twist Drill Company, established in 1877, were manufacturers of twist drills and mechanics'tools at 166 Grape Street.
- Drill a {-inch hole, the mounting hole, with a twist drill or narrow spade bit near the top of the back panel.
- Metric dimensioning is routinely used for drill bits of all types, although the details of BS 328 apply only to twist drill bits.
- :: Although steel poles can be drilled on-site with a annular drill bit or standard twist drill, it is not a recommended practice.
- :You can make your own TMS unit, or perhaps use a simpler brute force method using a twist drill and a large neodymium magnet.
- ANSI B94.11M-1979 sets size standards for jobber-length straight-shank twist drill bits from 1 / 64 inch through 1 inch in 1 / 64 inch increments.
- High-speed twist drills, for example, can be used to drill holes in acrylic, but the tip of drill bit may chip the surface of the material.
- A special tool grinder is available for sharpening or reshaping cutting surfaces on twist drill bits in order to optimize the bit for a particular material.
- Manufacturers can produce special versions of the twist drill bit, varying the geometry and the materials used, to suit particular machinery and particular materials to be cut.
- The ubiquitous twist drill bits used in metalworking also work well in wood, but they tend to chip wood out at the entry and exit of the hole.
- Number and letter sizes are commonly used for twist drill bits rather than other drill forms, as the range encompass the sizes for which twist drill bits are most often used.
- Number and letter sizes are commonly used for twist drill bits rather than other drill forms, as the range encompass the sizes for which twist drill bits are most often used.
- The same as traditional treatment method by any post and core, the root canal is prepared using parallel-side twist drill after treating and filling canal by an inert gutta percha or similar material.
- The bits use a rotary motion similar to a twist drill; however, the bits are designed with bearing pads that slide along the surface of the hole keeping the drill bit on center.
- *A twist drill is a bit with two cut grooves in opposite sides of a round bar, whereby the twisted bar produces a helical flute in order to drill holes in metal, plastic, or wood.
- However, the straight flute is poor at chip ejection, and can cause a burr to be formed on the exit side of the hole, more so than a spiral twist drill bit turning at high speed.
- It is one of the most widely used types, and is particularly common on the shank of taper-shank twist drills and machine reamers, in the spindles of industrial drill presses, and in the tailstocks of lathes.
twist drill sentences in Hindi. What are the example sentences for twist drill? twist drill English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.