type metal sentence in Hindi
Sentences
Mobile
- Once the matrix is positioned over the mould that forms the rest of the piece of type being cast, molten type metal is injected.
- The type caster would then give the mould a quick shake to aid the flow of type metal into every cavity of the matrix.
- Then, type metal, an alloy of lead, antimony, and tin, flows into the matrix to produce a single piece of type, ready for typesetting.
- The machine has a heated crucible for the hot type metal, with a mechanically actuated plunger which operates as part of the injection cycle.
- The new Swanson's Bridge replaced a former bridge of deck-type metal truss construction built in 1867 with the initial construction of the Main Range railway.
- Although care was taken to avoid mixing different types of type metal in shops with different type casting systems, in actual practice this often occurred.
- The " Space Radiation Monitor ", the secondary and experimental payload, is capable of measuring the p-type Metal-Oxide-Semiconductor Field Effects Transistors ( MOSFETs ) ".
- The assembled line is then cast as a single piece, called a " slug ", of type metal in a process known as hot metal typesetting.
- Their almost concurrently invented devices consisted of a narrow armlet to occlude the brachial artery, a small bicycle-type metal pump and a metal manometer graduated in mmHg.
- In this application, electrotyping was a higher quality but more costly alternative to stereotyping, which involved casting of type metal into a mold prepared from the forme.
- The island was reopened in December 2001, after airport-type metal detectors were installed to screen visitors before they board the ferry for the island from lower Manhattan.
- Antimony ( Sb ) melts at 630 �C . This highly crystalline metalloid, gives type metal its hardness and a much better and sharper cast from the matrix.
- Its alloys include pewter ( a tin alloy with up to 20 % antimony ) and type metal ( a lead alloy with up to 25 % antimony ).
- Despite patiently trying different proportions of both metals, solving the second part of the type metal problem proved very difficult without the addition of yet a third metal, antimony.
- Then this matrix would be held in the lower part of the mould, the upper part would close on it, and molten type metal would be poured into the cavity.
- Both scenarios, if not stopped by these safety features, usually result in a squirt of molten type metal, encasing the matrices and the elevator in metal in the process.
- The mold disk is sometimes water-cooled, and often air-cooled with a blower, to carry away the heat of the molten type metal and allow the cast slugs to solidify quickly.
- Currently, used types are semiconductor charge-coupled devices ( CCD ) or active pixel sensors in complementary metal oxide semiconductor ( CMOS ) or N-type metal-oxide-semiconductor ( NMOS, Live MOS ) technologies.
- When the line is justified, the matrices fit tightly between the vise jaws, forming a tight seal which will prevent the molten type metal from escaping when the line is cast.
- Although there was a large body of research and literature generated on molecular wire-type metal complexes through the mid-1980s, interest in stacked metal-metal bonds saw a decline until only very recently.
type metal sentences in Hindi. What are the example sentences for type metal? type metal English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.