ultimate tensile strength sentence in Hindi
Sentences
Mobile
- Ultra low expansion glass has an ultimate tensile strength of, a Poisson s ratio 0.17, a density of ( ), a Specific stiffness of ( ), a shear modulus of ( ), a bulk modulus of ( ), and an elastic modulus of ( ).
- Its ultimate tensile strength ( UTS ) depends on material density and is about 160 kPa at 8.5 mg / cm 3 and 1 kPa at 0.18 mg / cm 3; in comparison, the strongest silica aerogels have a UTS of 16 kPa at 100 mg / cm 3.
- Ductile materials have a fracture strength lower than the ultimate tensile strength ( UTS ), whereas in brittle materials the fracture strength is equivalent to the UTS . If a ductile material reaches its ultimate tensile strength in a load-controlled situation, it will continue to deform, with no additional load application, until it ruptures.
- Ductile materials have a fracture strength lower than the ultimate tensile strength ( UTS ), whereas in brittle materials the fracture strength is equivalent to the UTS . If a ductile material reaches its ultimate tensile strength in a load-controlled situation, it will continue to deform, with no additional load application, until it ruptures.
- Where \ sigma _ \ text { a } is the alternating stress, \ sigma _ \ text { m } is the mean stress, \ sigma _ \ text { fat } is the fatigue limit for completely reversed loading, and \ sigma _ \ text { ts } is the ultimate tensile strength of the material.
- The ranges of ultimate tensile strength and yield strength are largely based on the heat treatment that the alloy is subjected to following manufacturing, often T1 ( cooled from an elevated temperature shaping process and aged naturally to a substantially stable condition ) or T5 ( cooled from an elevated temperature shaping process and then artificially aged ) for alloy 6105 aluminum.
- Ultimate tensile strength of ordinary strength alloys is 58, 000-71, 000 psi ( 400-490 MPa ), except for ABS A shapes and bars with 58, 000-80, 000 psi ( 400-550 MPa ), and cold flanged sections with 55, 000-65, 000 psi ( 380-450 MPa ).
- The novel polymeric alloy core layer / s is made of a high performance polymer compound with a storage modulus of e " 1400 MPa at 23�C, measured by Dynamic Mechanical Analysis ( DMA ) at a frequency of 1 Hz according to ASTM D4065; or an ultimate tensile strength of at least 30 MPa . The outer layers are usually made of a polyethylene or polypropylene polymer, with a blend or alloy with other polymers, fillers, additives, fibers and elastomers.
- More Sentences: 1 2
ultimate tensile strength sentences in Hindi. What are the example sentences for ultimate tensile strength? ultimate tensile strength English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.