otto cycle sentence in Hindi
Sentences
Mobile
- In the Otto cycle, there is no heat transfer during the process 1 2 and 3 4 as they are isentropic processes.
- In Otto cycle engines, the cooling effects of water injection also enables greater compression ratios by reducing engine knocking ( detonation ).
- The Otto cycle consists of isentropic compression, heat addition at constant volume, isentropic expansion, and rejection of heat at constant volume.
- It was a low-RPM machine, and only fired every other stroke due to the Otto cycle, also designed by Otto.
- The absence of any compression process in the design leads to lower thermal efficiency than the more well known Otto cycle and Diesel cycle.
- The Otto cycle design convention calls for combustion just before top dead center ( BTDC ) in order to allow combustion pressure to build.
- Comparing the two formulae it can be seen that for a given compression ratio ( ), the ideal Otto cycle will be more efficient.
- Other cycles, such as the Otto cycle, Diesel cycle and Brayton cycle, can be analyzed from the standpoint of the Carnot cycle.
- The heat energy source is generated external to the Stirling engine rather than by internal combustion as with the Otto cycle or Diesel cycle engines.
- It is this engine ( the Otto Silent Engine ), and not the Otto & Langen engine, to which the Otto cycle refers.
- If you look at data from real engines you can compare the pressure / temperaure vs stroke, with what the ideal Otto cycle would predict.
- It is this engine ( the Otto Silent Engine ), and not the Otto & Langen engine, to which the " Otto cycle " refers.
- Ford argued his cars used the four-stroke Alphonse Beau de Rochas cycle or Otto cycle and not the Brayton cycle engine used in the Selden auto.
- An example would be the use of an air compressor such as a turbocharger to increase the volume of air used in power stroke of the otto cycle.
- Virtually all of the world's makers of automobiles produce vehicles using Otto cycle engines which are so ubiquitous as to be referred to as gasoline engines.
- This is why the four-stroke principle today is commonly known as the Otto cycle and four-stroke engines using spark plugs often are called Otto engines.
- The most common cycles used to model internal combustion engines are the Otto cycle, which models gasoline engines, and the Diesel cycle, which models diesel engines.
- This is an idealized mathematical model : real physical diesels do have an increase in pressure during this period, but it is less pronounced than in the Otto cycle.
- For the constant volume adiabatic process, combustion is thought to occur instantaneously when the piston reaches the top of its apex ( Otto cycle or constant volume cycle ).
- The Otto cycle or Diesel cycle used in piston engines has a much lower specific fuel consumption than the Brayton cycle of a traditional gas turbine engines at low speed.
otto cycle sentences in Hindi. What are the example sentences for otto cycle? otto cycle English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.